Amylase from Bacillus sp. Produced by Solid State Fermentation Using Cassava Bagasse as Starch Source

Abstract Amylases are enzymes involved in starch hydrolysis, generating the most diverse products, such as maltose, glucose and dextrins. This work aimed the study of the production of amylolytic enzymes via solid-state fermentation (SSF) using "crueira", an essentially starchy cassava residue, as substrate-support and Bacillus sp. as microorganism. For the implementation of the experimental part, a Central Composite Design (CCD) with three variables (initial moisture, pH and temperature) was made. Each test was examined at 24, 48 and 72 hours by the method of starch dextrinizing activity. The optimum production conditions were 60% initial moisture, pH 6 and 37 °C. The maximum yield was 437.76 U/g in 72 hours of fermentation. The optimum temperature of enzyme performance was 65 °C. The pH optimum range was 4 to 6. The Co2 +, Ca2 + and K+ ions positively influenced the activity of enzymes and the Fe2+ ion had no effect on enzymatic activity. On the other hand, the ions Hg2+, Zn2+, Cu2+, Mn2+ and Mg2+ adversely influenced enzymatic activity. Therefore, producing amylases from Bacillus sp. and using crueira as a substrate is possible.

Enhanced production of glutaminase-free L-asparaginase by marine Bacillus velezensis and cytotoxic activity against breast cancer cell lines

Background: The increasing rate of breast cancer globally requires extraordinary efforts to discover new effective sources of chemotherapy with fewer side effects. Glutaminase-free L-asparaginase is a vital chemotherapeutic agent for various tumor malignancies. Microorganisms from extreme sources, such as marine bacteria, might have high L-asparaginase productivity and efficiency with exceptional antitumor action toward breast cancer cell lines. Results: L-Asparaginase-producing bacteria, Bacillus velezensis isolated from marine sediments, were identified by 16S rRNA sequencing. L-Asparaginase production by immobilized cells was 61.04% higher than that by free cells fermentation. The significant productivity of enzyme occurred at 72 h, pH 6.5, 37°C, 100 rpm. Optimum carbon and nitrogen sources for enzyme production were glucose and NH4Cl, respectively. L-Asparaginase was free from glutaminase activity, which was crucial medically in terms of their severe side effects. The molecular weight of the purified enzyme is 39.7 KDa by SDS-PAGE analysis and was ideally active at pH 7.5 and 37°C. Notwithstanding, the highest stability of the enzyme was found at pH 8.5 and 70°C for 1 h. The enzyme kinetic parameters displayed Vmax at 41.49 µmol/mL/min and a Km of 3.6 × 10−5 M, which serve as a proof of the affinity to its substrate. The anticancer activity of the enzyme against breast adenocarcinoma cell lines demonstrated significant activity toward MDA-MB-231 cells when compared with MCF-7 cells with IC50 values of 12.6 ± 1.2 µg/mL and 17.3 ± 2.8 µg/mL, respectively. Conclusion: This study provides the first potential of glutaminase-free L-asparaginase production from the marine bacterium Bacillus velezensis as a prospect anticancer pharmaceutical agent for two different breast cancer cell lines.

Screening of bacterial extracellular xylanase producers with potential for cellulose pulp biobleaching

In this study, two hundred fifty-seven bacterial isolates from a suppressive soil library were screened to study their secretion of alkali-thermostable xylanases for potential use in cellulose pulp biobleaching. Xylanase activity was evaluated in solid and liquid media using xylan as the carbon source. Isolates were initially evaluated for the degradation of xylan in solid media by the congo red test. Selected strains were evaluated in liquid media for enzymatic activity and determination of total protein concentration using a crude protein extract (CPE). An isolate identified as Bacillus species TC-DT13 produced the highest amount of xylanase (1808 U mL-1). The isolate was active and stable at 70°C and pH 9.0, conditions which are necessary for the paper industry. This isolate can grow and produce xylanase in medium containing wheat fiber as a substrate. The CPE of this isolate was used in preliminary testing on cellulose pulp bleaching; enzyme treatment of the pulp resulted in a 5% increase of whiteness.

Heterologous expression and enhanced production of ß-1, 4-glucanase of Bacillus halodurans C-125 in Escherichia coli

Background: Recombinant DNA technology enables us to produce proteins with desired properties and insubstantial amount for industrial applications. Endo-1, 4-ß-glucanases (Egl) is one of the major enzyme involved in degradation of cellulose, an important component of plant cell wall. The present study was aimed at enhancing the production of endo-1, 4-ß-glucanases (Egl) of Bacillus halodurans in Escherichia coli. Results: A putative Egl gene of Bacillus Halodurans was expressed in E. coli by cloning in pET 22b (+). On induction with isopropyl-b-D-1-thiogalactopyranoside, the enzyme expression reached upto ~20% of the cell protein producing 29.2 mg/liter culture. An increase in cell density to 12 in auto-inducing LB medium (absorbance at 600 nm) enhanced ß-glucanase production up to 5.4 fold. The molecular mass of the enzyme was determined to be 39 KDa, which is nearly the same as the calculated value. Protein sequence was analyzed by CDD, Pfam, I TASSER, COACH, PROCHECK Servers and putative amino acids involved in the formation of catalytic, substrate and metal binding domains were identified. Phylogenetic analysis of the ß-glucanases of B. halodurans was performed and position of Egl among other members of the genus Bacillus producing endo-glucanases was determined. Temperature and pH optima of the enzyme were found to be 60°C and 8.0, respectively, under the assay conditions. Conclusion: Production of endo-1, 4 ß-glucanase enzymes from B. halodurans increased several folds when cloned in pET vector and expressed in E. coli. To our knowledge, this is the first report of high-level expression and characterization of an endo-1, 4 ß-glucanases from B. halodurans.

Inducible cellulase production from an organic solvent tolerant Bacillus sp. SV1 and evolutionary divergence of endoglucanase in different species of the genus Bacillus

Abstract Bacteria are important sources of cellulases with various industrial and biotechnological applications. In view of this, a non-hemolytic bacterial strain, tolerant to various environmental pollutants (heavy metals and organic solvents), showing high cellulolytic index (7.89) was isolated from cattle shed soil and identified as Bacillus sp. SV1 (99.27% pairwise similarity with Bacillus korlensis). Extracellular cellulases showed the presence of endoglucanase, total cellulase and β-glucosidase activities. Cellulase production was induced in presence of cellulose (3.3 times CMCase, 2.9 times FPase and 2.1 times β-glucosidase), and enhanced (115.1% CMCase) by low-cost corn steep solids. An in silico investigation of endoglucanase (EC 3.2.1.4) protein sequences of three Bacillus spp. as query, revealed their similarities with members of nine bacterial phyla and to Eukaryota (represented by Arthropoda and Nematoda), and also highlighted of a convergent and divergent evolution from other enzymes of different substrate [(1,3)-linked beta-d-glucans, xylan and chitosan] specificities. Characteristic conserved signature indels were observed among members of Actinobacteria (7 aa insert) and Firmicutes (9 aa insert) that served as a potential tool in support of their relatedness in phylogenetic trees.

Highly efficient enzymatic preparation of isomalto-oligosaccharides from starch using an enzyme cocktail

Background: Current commercial production of isomalto-oligosaccharides (IMOs) commonly involves a lengthy multistage process with low yields. Results: To improve the process efficiency for production of IMOs, we developed a simple and efficient method by using enzyme cocktails composed of the recombinant Bacillus naganoensis pullulanase produced by Bacillus licheniformis, α-amylase from Bacillus amyloliquefaciens, barley bran ß-amylase, and α-transglucosidase from Aspergillus niger to perform simultaneous saccharification and transglycosylation to process the liquefied starch. After 13 h of reacting time, 49.09% IMOs (calculated from the total amount of isomaltose, isomaltotriose, and panose) were produced. Conclusions: Our method of using an enzyme cocktail for the efficient production of IMOs offers an attractive alternative to the process presently in use.

Statistical optimization of thermo-alkali stable xylanase production from Bacillus tequilensis strain ARMATI

Background: Xylanase from bacteria finds use in prebleaching process and bioconversion of lignocelluloses into feedstocks. The xylanolytic enzyme brings about the hydrolysis of complex biomolecules into simple monomer units. This study aims to optimize the cellulase-free xylanase production and cell biomass of Bacillus tequilensis strain ARMATI using response surface methodology (RSM). Results: Statistical screening of medium constituents and the physical factors affecting xylanase and biomass yield of the isolate were optimized by RSM using central composite design at N = 30, namely 30 experimental runs with 4 independent variables. The central composite design showed 3.7 fold and 1.5 fold increased xylanase production and biomass yield of the isolate respectively compared to 'one factor at a time approach',inthe presence of the basal medium containing birchwood xylan (1.5% w/v) and yeast extract (1% w/v), incubated at 40°C for 24 h. Analysis of variance (ANOVA) revealed high coefficient of determination (R2)of0.9978 and 0.9906 for the respective responses at significant level (p < 0.05). The crude xylanase obtained from the isolate showed stability at high temperature (60°C) and alkaline condition (pH 9) up to 4 h of incubation. Conclusions: The cellulase-free xylanase showed an alkali-tolerant and thermo-stable property with potentially applicable nature at industrial scale. This statistical approach established a major contribution in enzyme production from the isolate by optimizing independent factors and represents a first reference on the enhanced production of thermo-alkali stable cellulase-free xylanase from B. tequilensis.

Bioconversion of agro-industrial wastes for the production of fibrinolytic enzyme from Bacillus halodurans IND18: Purification and biochemical characterization

Background: Agro-wastes were used for the production of fibrinolytic enzyme in solid-state fermentation. The process parameters were optimized to enhance the production of fibrinolytic enzyme from Bacillus halodurans IND18 by statistical approach. The fibrinolytic enzyme was purified, and the properties were studied. Results: A two-level full factorial design was used to screen the significant factors. The factors such as moisture, pH, and peptone were significantly affected enzyme production and these three factors were selected for further optimization using central composite design. The optimum medium for fibrinolytic enzyme production was wheat bran medium containing 1% peptone and 80% moisture with pH 8.32. Under these optimized conditions, the production of fibrinolytic enzyme was found to be 6851 U/g. The fibrinolytic enzyme was purified by 3.6-fold with 1275 U/mg specific activity. The molecular mass of fibrinolytic enzyme was determined by sodium dodecyl sulphate polyacrylamide gel electrophoresis, and it was observed as 29 kDa. The fibrinolytic enzyme depicted an optimal pH of 9.0 and was stable at a range of pH from 8.0 to 10.0. The optimal temperature was 60°C and was stable up to 50°C. This enzyme activated plasminogen and also degraded the fibrin net of blood clot, which suggested its potential as an effective thrombolytic agent. Conclusions: Wheat bran was found to be an effective substrate for the production of fibrinolytic enzyme. The purified fibrinolytic enzyme degraded fibrin clot. The fibrinolytic enzyme could be useful to make as an effective thrombolytic agent.

Production, purification and characterization of an ionic liquid tolerant cellulase from Bacillus sp. isolated from rice paddy field soil

Background: Lignocellulosic biomass is a renewable, abundant, and inexpensive resource for biorefining process to produce biofuel and valuable chemicals. To make the process become feasible, it requires the use of both efficient pretreatment and hydrolysis enzymes to generate fermentable sugars. Ionic liquid (IL) pretreatment has been demonstrated to be a promising method to enhance the saccharification of biomass by cellulase enzyme; however, the remaining IL in the hydrolysis buffer strongly inhibits the function of cellulase. This study aimed to isolate a potential IL-tolerant cellulase producing bacterium to be applied in biorefining process. Result: One Bacillus sp., MSL2 strain, obtained from rice paddy field soil was isolated based on screening of cellulase assay. Its cellulase enzyme was purified and fractionated using a size exclusion chromatography. The molecular weight of purified cellulose was 48 kDa as revealed by SDS-PAGE and zymogram analysis. In the presence of the IL, 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]) concentration of 1 M, the cellulase activity retained 77.7% of non-IL condition. In addition, the optimum temperature and pH of the enzyme is 50°C and pH 6.0, respectively. However, this cellulase retained its activity more than 90% at 55°C, and pH 4.0. Kinetic analysis of purified enzyme showed that the Km and Vmax were 0.8 mg/mL and 1000 μM/min, respectively. Conclusion: The characterization of cellulase produced from MSL2 strain was described here. These properties of cellulase made this bacterial strain become potential to be used in the biorefining process.

The genotypic diversity and lipase production of some thermophilic bacilli from different genera

Abstract Thermophilic 32 isolates and 20 reference bacilli were subjected to Rep-PCR and ITS-PCR fingerprinting for determination of their genotypic diversity, before screening lipase activities. By these methods, all the isolates and references could easily be differentiated up to subspecies level from each other. In screening assay, 11 isolates and 7 references were found to be lipase producing. Their extracellular lipase activities were measured quantitatively by incubating in both tributyrin and olive oil broths at 60 °C and pH 7.0. During the 24, 48 and 72-h period of incubation, the changes in the lipase activities, culture absorbance, wet weight of biomass and pH were all measured. The activity was determined by using pNPB in 50 mM phosphate buffer at pH 7.0 at 60 °C. The lipase production of the isolates in olive oil broths varied between 0.008 and 0.052, whereas these values were found to be 0.002-0.019 (U/mL) in the case of tyributyrin. For comparison, an index was established by dividing the lipase activities to cell biomass (U/mg). The maximum thermostable lipase production was achieved by the isolates F84a, F84b, and G. thermodenitrificans DSM 465T (0.009, 0.008 and 0.008 U/mg) within olive oil broth, whereas G. stearothermophilus A113 displayed the highest lipase activity than its type strain in tyributyrin. Therefore, as some of these isolates displayed higher activities in comparison to references, new lipase producing bacilli were determined by presenting their genotypic diversity with DNA fingerprinting techniques.

Production of extracellular alkaline protease by new halotolerant alkaliphilic Bacillus sp. NPST-AK15 isolated from hyper saline soda lakes

Background Alkaline proteases are among the most important classes of industrial hydrolytic enzymes. The industrial demand for alkaline proteases with favorable properties continues to enhance the search for new enzymes. The present study focused on isolation of new alkaline producing alkaliphilic bacteria from hyper saline soda lakes and optimization of the enzyme production. Results A new potent alkaline protease producing halotolerant alkaliphilic isolate NPST-AK15 was isolated from hyper saline soda lakes, which affiliated to Bacillus sp. based on 16S rRNA gene analysis. Organic nitrogen supported enzyme production showing maximum yield using yeast extract, and as a carbon source, fructose gave maximum protease production. NPST-AK15 can grow over a broad range of NaCl concentrations (0-20%), showing maximal growth and enzyme production at 0-5%, indicated the halotolerant nature of this bacterium. Ba and Ca enhanced enzyme production by 1.6 and 1.3 fold respectively. The optimum temperature and pH for both enzyme production and cell growth were at 40°C and pH 11, respectively. Alkaline protease secretion was coherent with the growth pattern, started at beginning of the exponential phase and reached maximal in mid stationary phase (36 h). Conclusions A new halotolerant alkaliphilic alkaline protease producing Bacillus sp. NPST-AK15 was isolated from soda lakes. Optimization of various fermentation parameters resulted in an increase of enzyme yield by 22.8 fold, indicating the significance of optimization of the fermentation parameters to obtain commercial yield of the enzyme. NPST-AK15 and its extracellular alkaline protease with salt tolerance signify their potential applicability in the laundry industry and other applications.

Cellulase production by thermophilic Bacillus sp: SMIA-2 and its detergent compatibility

Background This paper reports the production of cellulase by thermophilic Bacillus sp. SMIA-2 using sugarcane bagasse and corn steep liquor as substrates. Some biochemical properties of the enzyme were also assessed for the purposes of exploiting its potential in the detergent industry, as well as other suitable applications. Results Bacillus sp. produced cellulases when cultivated at 50°C in liquid cultures containing sugarcane bagasse and corn steep liquor. Maximum avicelase (0.83 U mL-1) and CMCase (0.29 U mL-1) activities were reached in 120 h and 168 h of culturing time, respectively. The avicelase and CMCase presented an optimum activity at pH of 7.5 and 8.0, respectively. The maximum stability of avicelase and CMCase was observed at a pH range between 6.5-8.0 and 7.0-9.0 respectively, where they retained more than 70% of their maximum activities after incubation at room temperature for 3 h. The optimum temperature of avicelase and CMCase was 70°C, and both enzymes remained 100% stable until the treatment at 60°C for 1 h. Bacillus sp. cultures also released proteases into the culture medium, but the cellulases were resistant to protease digestion. The compatibility of cellulases varied with each laundry detergent tested, being more stable in the presence of Ultra Biz® and less with Ariel®. In addition, the enzyme was stable in sodium dodecyl sulfate and RENEX-95, and was inhibited by TritonX-100 and H2O2. Conclusions The properties presented by Bacillus sp. SMIA-2 suggest that this organism might become a potential source of lignocellulose-degrading enzymes for industrial applications such as in the detergent industry.

Concomitant production of detergent compatible enzymes by Bacillus flexus XJU-1

A soil screened Bacillus flexus XJU-1 was induced to simultaneously produce alkaline amylase, alkaline lipase and alkaline protease at their optimum levels on a common medium under submerged fermentation. The basal cultivation medium consisted of 0.5% casein, 0.5% starch and 0.5% cottonseedoil as an inducer forprotease, amylase, and lipase, respectively. The casein also served as nitrogen source for all 3 enzymes. The starch was also found to act as carbon source additive for both lipase and protease. Maximum enzyme production occurred on fermentation medium with 1.5% casein, 1.5% soluble starch, 2% cottonseed oil, 2% inoculum size, initial pH of 11.0, incubation temperature of 37 °C and 1% soybean meal as a nitrogen source supplement. The analysis of time course study showed that 24 h was optimum incubation time for amylase whereas 48 h was the best time for both lipase and protease. After optimization, a 3.36-, 18.64-, and 27.33-fold increase in protease, amylase and lipase, respectively was recorded. The lipase was produced in higher amounts (37.72 U/mL) than amylase and protease about 1.27 and 5.85 times, respectively. As the 3 enzymes are used in detergent formulations, the bacterium can be commercially exploited to secrete the alkaline enzymes for use in detergent industry. This is the first report for concomitant production of 3 alkaline enzymes by a bacterium.

Molecular characterization of a proteolysis-resistant lipase from Bacillus pumilus SG2

Proteolysis-resistant lipases can be well exploited by industrial processes which employ both lipase and protease as biocatalysts. A proteolysis resistant lipase from Bacillus pumilus SG2 was isolated, purified and characterized earlier. The lipase was resistant to native and commercial proteases. In the present work, we have characterized the lip gene which encodes the proteolysis-resistant lipase from Bacillus pumilus SG2. The parameters and structural details of lipase were analysed. The lip gene consisted of 650 bp. The experimental molecular weight of SG2 lipase was nearly double that of its theoretical molecular weight, thus suggesting the existence of the functional lipase as a covalent dimer. The proteolytic cleavage sites of the lipase would have been made inaccessible by dimerisation, thus rendering the lipase resistant to protease.

Isolation, Identification and Optimization of Culture Conditions of Bacillus sp. Strain PM1 for Alkalo-thermostable Amylase Production.

Aims: To isolate and optimize the culture conditions for thermo stable and alkaline amylase production from bacteria. Study Design: Optimization of different physiological and nutritional parameters for amylase production and kinetic studies of amylase. Place and Duration of Study: Soil Samples: Herbal garden of Amity University Haryana, Gurgaon (Manesar), India, between April 2012 and September 2012. Methodology: Amylolytic isolates were selected by flooding the nutrient agar plates containing 2% starch with Lugol solution. Isolates were selected on the basis of higher ratio of clear zone to colony size and grown in nutrient broth containing 2% starch. The level of amylase was detected in the culture filtrate. The selected isolate showing maximum amylase production was identified on the basis of 16S rDNA amplification. Results: An Alkalo-thermostable amylase producing bacterial isolate from soil was identified as Bacillus sp. strain PM1 on the basis of 16S rRNA. It yielded 3.5 U/ml of amylase in medium containing (%) starch 2.0, beef extract 0.5, NaCl 0.5 at 50ºC, pH 7.0 at 180 rpm after 72 h. The optimum pH and temperature for amylase activity was 8.0 and 50°C, respectively. The enzyme exhibited 67% activity after 60 minute incubation at 50ºC. At pH 8.0, the enzyme retained 78% activity after 4 h. Conclusion: The properties of the isolated enzyme are adequate for its use in starch processing and baking industry.

Statistical and evolutionary optimization for enhanced production of an anti-leukemic enzyme, L-asparaginase, in a protease-deficient Bacillus aryabhattai ITBHU02 isolated from the soil contaminated with hospital waste.

Over the past few decades, L-asparaginase has emerged as an excellent anti-neoplastic agent. In present study, a new strain ITBHU02, isolated from soil site near degrading hospital waste, was investigated for the production of extracellular L-asparaginase. Further, it was renamed as Bacillus aryabhattai ITBHU02 based on its phenotypical features, biochemical characteristics, fatty acid methyl ester (FAME) profile and phylogenetic similarity of 16S rDNA sequences. The strain was found protease-deficient and its optimal growth occurred at 37 °C and pH 7.5. The strain was capable of producing enzyme L-asparaginase with maximum specific activity of 3.02±0.3 Umg-1 protein, when grown in un-optimized medium composition and physical parameters. In order to improve the production of L-asparaginase by the isolate, response surface methodology (RSM) and genetic algorithm (GA) based techniques were implemented. The data achieved through the statistical design matrix were used for regression analysis and analysis of variance studies. Furthermore, GA was implemented utilizing polynomial regression equation as a fitness function. Maximum average L-asparaginase productivity of 6.35 Umg-1 was found at GA optimized concentrations of 4.07, 0.82, 4.91, and 5.2 gL‑1 for KH2PO4, MgSO4.7H2O, L-asparagine, and glucose respectively. The GA optimized yield of the enzyme was 7.8% higher in comparison to the yield obtained through RSM based optimization.

Optimization and characterization of alkaline protease and carboxymethyl-cellulase produced by Bacillus pumillus grown on Ficus nitida wastes

The potentiality of 23 bacterial isolates to produce alkaline protease and carboxymethyl-cellulase (CMCase) on Ficus nitida wastes was investigated. Bacillus pumillus ATCC7061 was selected as the most potent bacterial strain for the production of both enzymes. It was found that the optimum production of protease and CMCase were recorded at 30 °C, 5% Ficus nitida leaves and incubation period of 72 h. The best nitrogen sources for protease and CMCase production were yeast extract and casein, respectively. Also maximum protease and CMCase production were reported at pH 9 and pH 10, respectively. The enzymes possessed a good stability over a pH range of 8-10, expressed their maximum activities at pH10 and temperature range of 30-50 °C, expressed their maximum activities at 50 °C. Ions of Hg2+, Fe2+ and Ag+ showed a stimulatory effect on protease activity and ions of Fe2+, Mg2+, Ca2+, Cu2+ and Ag+ caused enhancement of CMCase activity. The enzymes were stable not only towards the nonionic surfactants like Triton X-100 and Tween 80 but also the strong anionic surfactant, SDS. Moreover, the enzymes were not significantly inhibited by EDTA or cystein. Concerning biotechnological applications, the enzymes retained (51-97%) of their initial activities upon incubation in the presence of commercials detergents for 1 h. The potential use of the produced enzymes in the degradation of human hair and cotton fabric samples were also assessed.

Optimization of extracellular thermophilic highly alkaline lipase from thermophilic Bacillus sp isolated from Hotspring of Arunachal Pradesh, India

Studies on lipase production were carried out with a bacterial strain (Bacillus sp LBN 2) isolated from soil sample of hotspring of Arunachal Pradesh, India. The cells were cultivated in a mineral medium with maximum production at 1% groundnut oil. The optimum temperature and initial medium pH for lipase production by the organism were 50ºC and 9.0 respectively. The molecular mass was found to be 33KDa by SDS PAGE. The optimal pH and temperature for activity were 10 and 60ºC respectively. The enzyme was found to be stable in the pH range of 8-11 with 90% retention of activity at pH 11. The enzyme retained 90% activity at 60ºC and 70% of activity at 70ºC for 1h. The lipase was found to be stable in acetone followed by ethanol. The present findings suggested the enzyme to be thermophilic alkaline lipase.

Comparative study on production of a-Amylase from Bacillus licheniformis strains

Alpha amylase (α-1, 4-glucan-glucanhydrolase, EC 3.2.1.1), an extracellular enzyme, degrades α, 1-4 glucosidic linkages of starch and related substrates in an endo-fashion producing oligosaccharides including maltose, glucose and alpha limit dextrin (7). The present study deals with the production and comparative study of production of α-amylase from two strains of Bacillus licheniformis, MTCC 2617 and 2618, by using four different substrates, starch, rice, wheat and ragi powder as carbon source by submerged fermentation. The effect of varying pH and incubation temperature, activator, inhibitor, and substrate concentration was investigated on the activity of α-amylase produced by MTCC strain 2618. The results shows that the production of the α-amylase by the B.licheniformis strain MTCC 2618, using four different substrates were found to be maximum (Starch 3.64 IU/ml/minutes, Rice powder 2.93 IU/ml/minutes, Wheat powder 2.67 IU/ml/minutes, Ragi powder 2.36 IU/ml/minutes) on comparing the enzyme production of two strains. It was also observed that the maximum production was found on the 3rd day (i.e. 72 hr) and characterization of crude enzyme revealed that optimum activity was at pH 7 and 37ºC.

Effects of substrates and reaction conditions on production of cyclodextrins using cyclodextrin glucanotransferase from newly isolated Bacillus agaradhaerens KSU-A11

The effects of reaction conditions on cyclodextrins (CDs) production by CGTase from newly isolated Bacillus agaradhaerens KSU-A11 is reported. Among six types of starch tested, potato starch gave highest starch conversion into CDs. In addition, CDs yield was about three fold higher when using gelatinized potato starch in comparison to raw starch. The total CDs production was increased with increasing pH, showing maximum starch conversion at pH 10. Furthermore, the proportion of gamma-CD was relatively higher under slightly acidic-neutral conditions than at alkaline pH with a maximum proportion of 35.6 percent at pH 7 compared to 7.6 percent at pH 10. Maximum starch conversion into CDs was seen at reaction temperature of 55ºC. Lower reaction temperature led to higher proportion of gamma-CD with maximum percentage at 35ºC. Cyclization reaction was significantly promoted in the presence CaCl2 (10 mM), while in the presence of ethyl alcohol there was significant decrease in CD production particularly at high concentration. beta-CD was the major product up to 1 hr reaction period with traces of alpha-CD and no detectable gamma-CD. However, as the reaction proceed, gamma-CD started to be synthesised and alpha-CD concentration increased up to 4 hrs, where the CDs ratios were 0.27:0.65:0.07 for alpha-CD:beta-CD:gamma-CD, respectively. In addition, optimum CGTase/starch ratio was obtained at 80 U/g starch, showing highest starch conversion into CDs. All the parameters involved have been shown to affect the products yield and/or specificity of B. agaradhaerens KSU-A11 CGTase.